Observation of radially polarized terahertz radiation generated by a sub-picosecond electron beam

The fundamental property of radially polarized terahertz radiation, which is axial symmetry of the polarization state in the radial direction, was measured with a Schottky diode detector and with a terahertz camera and wire-grid linear polarizer. Radially polarized terahertz radiation was generated from coherent transition radiation using a 30-MeV sub-picosecond electron beam. Bow-tie intensity distributions, aligned along the polarization direction, were clearly observed with the terahertz camera and could be rotated by changing the direction of the linear polarizer. The measured intensity distribution agreed with the calculated value. A video of the data can be found online.     

基于并行蚁群算法的长基线定位方法*

为了降低各个误差源对水声目标导航定位精度的影响,该文将水声目标导航定位问题抽象为带约束条件的非线性优化问题,并论证了最优化表达式参数求解过程与降低误差源干扰的过程具有同一性;设计了并行蚁群算法求其最优解。海试数据处理结果表明,该方法具有收敛速度快、解稳定和定位精度高等优点,能有效地降低各个误差源对水声目标导航定位精度的影响。     

Considerations in the determination of orientational order parameters from X-ray scattering experiments

An assessment of the data processing and analysis methods used to obtain the second- and fourth-rank orientational order parameters of liquid crystals from X-ray scattering experiments has been carried out, using experimental data from four extensively studied alkyl-cyanobiphenyls and calculated data generated from two general types of theoretical orientational distribution function. The application of a background subtraction and two different baseline correction methods to the scattering profiles is assessed, along with three different methods to analyse the processed data. The choice of baseline correction method is shown to have a significant effect: an offset to zero overestimates the order parameters from the experimental and calculated data sets, particularly for lower order parameters arising from broad distributions, whereas an offset to a value estimated from regions of low scattering intensity provides experimental values close to those reported from other experimental techniques. By contrast, the three different analysis methods are shown generally to result in relatively small absolute differences between the order parameters. We outline a straightforward general approach to experimental X-ray scattering data processing and analysis for uniaxial phases that results in order parameters that match well with those reported using other experimental techniques.     

Kalman滤波辅助的室内伪卫星相对定位算法

在室内伪卫星独立定位系统中, 伪卫星以及接收机的钟差会给定位精度带来非常大的误差. 针对这一问题, 提出了一种适用于室内环境的相对定位算法. 使用Kalman定位算法粗略计算接收机位置, 获得粗略基线, 建立室内相对定位模型, 得到载波相位双差和伪距双差. 载波相位双差通过互补Kalman滤波器来平滑伪距双差, 进一步得到精确基线, 获得接收机精确位置, 并将其代替Kalman定位算法的校正结果, 对接收机进行下一状态预测. 实验结果表明, 该算法具有较高的定位精度, 定位误差在20 cm以内. 关键词： 伪卫星 相对定位 双基线 Kalman滤波     

基于形态滤波的心电信号去除基线漂移方法

去除基线漂移是心电信号预处理过程中的重要一步,常见方法具有计算量大、结果不佳等缺陷.本文运用形态学理论,结合心电信号特征,提出了基于形态学的心电信号基线漂移去除方法.该方法采用不同形状及尺寸的结构元素设计了两级形态学滤波器,分别对信号进行开闭、闭开级联组合运算.经验证,提出的方法能很好保持心电信号的特征形态,提高了信噪比,减小了均方差,有效去除了基线漂移噪声.     

冷原子荧光光谱中数字基线估计方法的研究

水体中汞的存在形态有单质汞、无机汞和有机汞三种。其中,甲基汞是主要的有机汞形态,毒性远高于单质汞和无机汞。测量水体中的甲基汞的方法有很多,冷原子荧光光谱法是测量水体中甲基汞的推荐方法。冷原子荧光光谱法是原子发射光谱法和原子吸收光谱法综合发展而来的元素分析方法。经过多年的发展与完善,是元素分析最常用的分析技术之一,具有灵敏度高、检出限低等特点,被广泛应用于环境科学、生命科学、地质等领域。由于检测仪器的背景噪声和色谱柱分离效果的影响,冷原子荧光光谱出现基线漂移和信号拖尾等干扰因素,严重影响冷原子荧光光谱数据的峰面积计算和痕量甲基汞的定量分析。其中,基线漂移是最主要干扰因素。目前,改进模拟器件参数和数字基线估计是解决基线漂移的的两种重要手段。在改进模拟器件参数方面,有激发光源使用空心阴极汞灯、闭环控制的热阴极低压汞灯等,但存在实验设备复杂、成本高昂等缺陷;在数字基线估计方面,有最小二乘法、差值拟合法等,但存在基线估计不稳,含量计算不准等缺点。基于此,提出了一种基于小波变换的数字基线估计方法。首先,分析甲基汞的冷原子荧光光谱微观信号和基线漂移现象,建立冷原子荧光光谱信号和基线漂移数理模型;其次,根据冷原子荧光光谱信号模型的特点,以小波变换为研究基础,研究合适的母小波模型,将母小波模型与基线漂移模型进行卷积,卷积结果恒为零,理论上证明了基线漂移现象经过小波变换后会被消除;再次,以100 pg标样甲基汞为例,实验验证了小波变换能够有效地消除基线漂移的干扰和信号拖尾的影响;最后,在仪器相对标准差（RSD）为1.29%~3.40%的条件下,对0,10,20,50,100,500以及1 000 pg的标样甲基汞溶液进行5次重复实验,分别建立小波变换前后峰面积平均值校准曲线,校准曲线的相关系数（R2）由小波变换前的0.994提高到小波变换后的0.997。实验结果表明,该方法能够有效地消除测量仪器基线漂移和信号拖尾的影响,提升了系统测量准确性。     

高功率超短脉冲激光系统中光谱增益窄化补偿的调制函数

 设计了一种与高功率超短脉冲激光放大过程中获得的总增益、增益介质的带宽、激光带宽、脉冲中心波长等参数相关的调制函数，对激光放大过程中的光谱增益窄化进行补偿。此调制函数的优越性在于，对不同性能的激光系统，无需改变调制函数的形式就能适用。通过数值模拟的方法，讨论了在不同增益介质带宽、激光带宽、脉冲中心波长下的补偿效果。此调制函数在高功率超短脉冲激光系统中有良好的应用前景。     

平滑、导数、基线校正对近红外光谱PLS定量分析的影响研究

基于偏最小二乘法 ,利用平滑、导数、基线校正预处理手段 ,对近红外光谱进行了定量分析 ,比较了分析结果 ,给出了不同预处理方法的PRESS值和RMSEC的值 ,比较并选取了最佳预处理方法。在平滑预处理方法中 ,比较了不同平滑点数对预测的影响 ,确定了最佳平滑点数 ,通过采用PLS回归分析 ,与原始光谱数据回归比较 ,结果令人满意。     

A simple model for high fluence ultra-short pulsed laser metal ablation

The ultra-short laser metal ablation is a very complex process, the complete simulation of which requires applications of complicated hydrodynamics or molecular dynamics models, which, however, are often time-consuming and difficult to apply. For many practical applications, where the laser ablation depth is the main concern, a simplified model that is easy to apply but at the same time can also provide reasonably accurate predictions of ablation depth is very desirable. Such a model has been developed and presented in this paper, which has been found to be applicable for laser pulse duration up to 10 ps based on comparisons of model predictions with experimental measurements.     

基于氧气A吸收带的baseline拟合距离反演算法

目标红外被动测距的实现同气体及其波段的选取密切相关。氧气A吸收带具有独特的谱线结构,对于火箭羽流或者高温辐射体的距离探测,氧气A吸收带是最佳的距离反演通道。利用该特点,详细研究了逐线积分算法(LBLRTM),并设计了氧气A带吸收系数及标准光谱计算软件;利用A吸收带吸收光谱带外数据,采用多项式拟合方法,实现基线(baseline)拟合,进而得到带平均透过率;在不同的距离条件下,将两种带平均透过率进行对比,误差在1.9%左右,拟合精度较高,该方法为后续距离的精确反演提供了理论依据。